مقاله در مجلات

Journal title, volume, issue, pages.
2020 S. Safari, H. Ali. Ozgoli Electrochemical Modeling and Techno‐Economic Analysis of Solid Oxide Fuel Cell for Residential Applications Journal of Renewable Energy and Environment, 7, 40‐50
2020 Mohsen Shahabi, Hassan Ali Ozgoli, Abbas Akbarnia Modeling and Investigation of Gas Turbines Heat Recovery in the Semnan Oil Pumping Station for Heating Gas-Oil to Reduce Energy Consumption of Pumping Journal of Energy Management and Technology, 4, 21‐27
2019 S. M. Arabi, H. Ghadamian, M. Aminy, H. A. Ozgoli, B. Ahmadi, M. Khodsiani The energy analysis of GE‐F5 gas turbines inlet air–cooling systems by the off‐design method Measurement and Control, 52, 1489‐1498
2019 Design, fabrication and evaluation of horizontal rotary separator of olive oil (Three-Phase Decanter), Agric Eng Int (CIGR Journal), July 2019, Vol.21, No. 2, 180-187 , .
2019 An evaluation of physical, dynamic and aerodynamic properties of olive, مجله علمی Research in Agricultural Engineering (RAE Journal), 65, 2019 (2): 48-55, .
2019 " Effect of temperature, water content and velocity on the quality of virgin olive oil extracted through three-phase centrifuge AIMS Agriculture and Food ، .2019; 4(1): 165–176
2019 " The feasibility of using image processing and artificial neural network for detecting the adulteration of sesame oil AIMS Agriculture and Food ، .2019; 4(2): 237–243
2019 A study on the Three-Phase Separator Machine (Tricanter) for Olive Oil Extraction " Journal of Theoretical and Applied Mechanics
2019 " Fusion of dielectric technique and intelligence methods in order to predict acidity and peroxide of virgin olive oil International Journal of Postharvest Technology and Innovation ، .2019; Accepted 4(2): 237–243
2019 " Fabrication and Evaluation of Continuous Press Machine for Extracting Sesame Oil using artificial intelligence techniques International Commission of Agricultural and Biosystems Engineering (CIGR Journal) ، .2019;ACcepted 4(2): 237–243
2018 Fabrication and evaluation of Rotary Separator of Sesame Oil, مجله علمیInternational Journal of Food Science and Biotechnology, 2018; 3(3): 77-82.
2018 Application an Euler–Euler Multiphase-Flow Model for Simulation Flow in a Centrifugal Separator Machine, American Journal of Fluid Dynamics, 2018, 8 (4): 112-115..
2018 Design and Optimization of Press Machine in Order to Produce Sesame Oil" American Journal of Mechanics and Applications 2018 ; 6(4):
2018 طراحی و ساخت یک گازی ساز زیست توده مقیاس کوچک از نوع پایین سو (Down Draft) بمنظور تولید انرژی از پسماندهای جامد
2018 S. A. Emami and M. H. Emami Design and Implementation of an Online Precise Monitoring and Performance Analysis System for Centrifugal Pumps IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS Issue Date: FEBRUARY 2018 Volume: 65, Issue:2 On Page(s): 1636-1644 Print ISSN: 0278-0046 Online ISSN: 1557-9948 Digital Object Identifier: 10.1109/TIE.2017.2723875
2017 طراحي و ساخت يك مدل آزمايشگاهي موزع با ترتيب ريزش نردباني (عرضي) قلمه براي استفاده در كارنده نيشكر در نشريه علمي پژوهشي ماشين هاي كشاورزي دانشگاه فردوسي مشهد. جلد 7، نيمسال اول 1396، ص 321-312.
2017 2. Hossein Ghadamian, Hassan Ali Ozgoli, Foad Farhani, and Mojtaba Baghban Yousefkhani Proposing New Algorithm for Modeling of Regenerative Fuel Cell (RFC) System ", (Accepted), JREE, 2017
2017 1. Siamak Azimi-Nam and Foad Farhani ffect of Temperature on Electrical Parameters of Phosphorous Spin–on Diffusion of Polysilicon Solar Cells (Accepted), JREE, 2017.
2016 3. Hassan Ali Ozgoli, Meisam Moghadasi, Foad Farhani, Maziar Sadigh Modeling and simulation of an Integrated Gasification SOFC-CHAT Cycle to Improve Power and Efficiency Environmental Progress, Published online in Wiley Online Library (wileyonlinelibrary.com), DOI 10.1002/ep.12487, (2016)
2015 7. Ardekani, M.A., Farhani, F., Mazidi, M ., Effects of Cross Wind Conditions on Efficiency of Heller Dry Cooling Tower, Experimental Heat Transfer (EHT), 28(4), 07/2015.
2015 4. Ardekani, M.A., M.A. Ranjbar, Farhani, F., Use of Guide Vanes for Improvement of Flow Pattern and Enhancement of Thermal Performance of Dry Cooling Towers Mechanics and Industry, Accepted on 21/10/2015.
2015 محمد علي اردكاني، محسن مزيدي، فواد فرحاني بررسي هاي ميداني و تحليلي اثر عوامل محيطي بر عملكرد برجهاي خنك كن خشك هلر از ديدگاه اقتصادي مجله مهندسي مكانيك ايران - انجمن مهندسي مكانيك ايران، 1394
2015 2. محمد علي اردكاني، فواد فرحاني، محسن مزيدي بررسي تجربي استفاده از ديوارهاي يادشكن براي افزايش دبي ورودي برج هلر تحت وزش باد مجله مهندسي مكانيك ايران - انجمن مهندسي مكانيك ايران
2014 S. M. Arabi, H. Ghadamian, M. Aminy, H. A. Ozgoli, B. Ahmadi, M. Khodsiani Energy performance analysis of GE‐F5 gas turbines at off‐design conditions by applying an innovative convergent– divergent system for the inlet air cooling Measurement and Control, 52, 1508‐1516
2014 S. Hosseinpour, A. Haji Seyed Mirzahosseini, R. Mehdipour, A. H. Hemmasi, H. A. Ozgoli Energy Modelling and Techno‐Economic Analysis of a Biomass Gasification‐CHAT‐ST Power Cycle for Sustainable Approaches in Modern Electricity Grids Journal of Renewable Energy and Environment, 7, 43‐51
2014 Simulation of draft force of winged share tillage tool using artificial neural network model مجله علمی Agric Eng Int: CIGR Journal, Vol 16, No 4, 57-65. Dec. 2014.
2014 29. Farhani, F., Venkatarathnam, G. and Sarangi, S.K., Effect of Finite Number of Plates on the Transient Response of Perforated Plates, during a Single-Blow Transient Test of Matrix Heat Exchanger Surfaces”, Procd. 18th International Cryogenic Conference (ICEC18), Mumbai, India. Published in Ind. J. Cryogenics (2001).
2014 Study of fuel consumption in Three tillage methods. 2014 Research in Agricultural Engeneering ، Vol. 60, 2014, No 4: 142-147 ، RAE (2014) .
2014 14. Abbas Akbarnia, Foad Farhani, Study of Fuel Consumption in Three Tillage Methods ”, Research in Agricultural Engineering (In Press) (2013).
2014 13. Alireza Ashori, Shabnam Sheshmani, Foad Farhani Preparation and characterization of bagasse/HDPE composites using multi-walled carbon nanotubes”, Carbohydrate Polymers 92 (2013) 865– 871.
2014 9. Abbas Akbarnia, Foad Farhani, Study of Fuel Consumption in Three Tillage Methods”, Research in Agricultural Engineering (RAE), 60(4), pp. 142 –147, (2014).
2014 8. A. Akbarnia, A. Mohammadi, F. Farhani, R. Alimardani Simulation of draft force of winged share tillage tool using artificial neural network model" Agric Eng Int: CIGR Journal, 16(4), 57-61, (2014).
2014 6. Ardekani, M.A., Farhani, F., Mazidi, M., M.A. Ranjbar Study of Degradation of Dry cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement International Journal of Engineering (IJE), 28(3), 460-466, (March 2015).
2014 5. Foad Farhani and Azar Anvari, Effects of Some Parameters on the Thermal Control of a Small LEO Satellite Journal of Space Science and Technology (JSST), 7(1) (2014
2014 International Conference on Mechanical and Aerospace Engineering, University of Tehran, Tehran-Iran, April, 2016 بررسي تجربي تاثير تغيير فاصله و خميدگي پره هاي راهنما بر كيفيت جريان خروجي نشريه علمي-پژوهشي مهندسي هوانوردي، سال شانزدهم، شماره دوم، پاييز و زمستان 93.
2014 كريمي، د. ، ملكيان، م. م. اندازه گيري ميدان كرنش و نرخ كرنش در حين ماشينكاري بر پايه روش هم ربطي تصاوير مجله مهندسی مکانیک مدرس، شماره 13
2013 عنوانEconomic comparison of tillage and planting operations in three tillage systems, 2013, Agric Eng Int: CIGR Journal, Vol 15, No 4, 180-184
2013 بررسي سوخت مصرف شده و میزان عملکرد محصول جو در سه روش خاک¬ورزی مجله پژوهش¬هاي توليدات گياهي، جلد 20، شماره 1، ص 203-210، دانشگاه علوم کشاورزی و منابع طبیعی گرگان.
2013 12. Mohammad Hasan Shojaeefard, Reza Abdi Behnagh, Mostafa Akbari, Mohammad Kazem Besharati Givi, Foad Farhani “Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm Materials and Design, 44 (2013) 190–198.
2013 11. Mostafa Akbari, Mohammad Hasan Shojaeefard, Mojtaba Tahani, Foad Farhani Sensitivity Analysis of the Artificial Neural Network Outputs in Friction Stir Lap Joining of Aluminum to Brass ", Advances in Materials Science and Engineering, (2013).
2013 10. Abbas Akbarnia, Foad Farhani, Bahareh Heidary Economic comparison of tillage and planting operations in three tillage systems" Agricultural Engineering International: CIGR Journal, Dec. (2013
2013 M. M. Malekian, L. A. Isayevich Rolling Strips Varying Thickness with Elimination of Widening dvanced Material Research, Vol: 622-623, pp:466-471.
2012 Modeling of draft force variation in a winged share tillage tool using fuzzy table look-up scheme, 2012, Agric Eng Int: CIGR Journal, Vol 14, No 4, 262-268.
2012 16. Mohammad Ali Ardekani, Vahid Reza Nafisi, Foad Farhani “ Extrapolation of Calibration Curve of Hot-wire Spirometer using a Novel Neural Network Based Approach , JMSS/July 2012, Vol. 2(4).
2012 15. Farhani F., Niaki K.S., Vahdat S.E., Firozi A Study of Effects of Deep Cryotreatment on Mechanical Properties of 1.2542 Tool Steel, Materials and Design, 42 (2012(, pp 279-288.
2011 عنوان اثرات سرعت دورانی خردکن چکشی، دما و زمان هم زدن بر کمیت و کیفیت روغن زیتون رقم روغنی، 1390 مجله تحقیقات مهندسی کشاورزی، جلد 12، شماره 1، ص 82-71، وزارت جهاد کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی.
2011 19. Nourbakhsh, A., Farhani, F. and Ashori, A Nano-SiO2 filled rice husk/polypropylene composites: Physio-mechanical properties” Industrial Crops and Products, 33 (2011), pp. 183-187.
2011 18. Shabnam Sheshmani, Alireza Ashori, Foad Farhani Effect of Extractives on the Performance Properties of Wood Flour-Polypropylene Composites Journal of Applied Polymer Science, Vol. 000, 000–000 (2011), © 2011 Wiley Periodicals, Inc. DOI 10.1002/app.34745, Published online in Wiley Online Library (wileyonlinelibrary.com)
2011 17. F. Farhani, and K.S. Niaki, A Programmable System for Treatment of Alloy Steels at Cryogenic Temperatures”
2010 مقايسه ي انرژی مصرف شده و میزان عملکرد محصول در سه سامانه خاک ورزی در کشت جو، 1389 اولین همایش ملی مکانیزاسیون و فن آوری های نوین در کشاورزی، 27 و 28 بهمن 89، دانشکده کشاورزی، اهواز.
2010 Performance Comparison of Three tillage systems in Wheat Farms Australian journal of Crop Science ، AJCS 4(8):586-589 (2010).
2010 20. Ardekani, M. A., and Farhani, F Practical Considerations for Validity of Constant Temperature Anemometer Flow Measurements in Industrial Applications Flow Measurement and Instrumentation (2010).
2009 تاثیرات دما و درصد افزایش آب به خمیر زیتون بر خصوصیات كيفي و كمي روغن زیتون، ، مجله علوم کشاورزی و منابع طبیعی، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، شماره هشتم، ص 180-174.
2009 عنوان بررسی برخی عوامل موثر بر استحصال كيفي و كمي روغن در حرارت و زمان¬های مختلف به همزدن خمیر حاصل از دانه ی رقم روغنی زيتون 1388، مجله مهندسي بيوسيستم ايران (مجله علوم كشاورزي)، پرديس كشاورزي و منابع طبيعي دانشگاه تهران، دوره 40 شماره 1، ص 14-9.
2009 تعيين و مقايسه مقاومت فشاري چهار رقم زيتون رايج در ايران 1387، مجله علوم كشاورزي، پرديس كشاورزي و منابع طبيعي دانشگاه تهران، دوره 39 شماره 2، ص 237-243.
2009 23. Emami, H. and Farhani, F Frequency Response Analysis of a Small Satellite Structure under Random Vibration Acceleration Loads Using Mode Superposition Method J. Materials Science Research India, Volume 6(1), (2009).
2009 22. A. Anvari, A., Farhani, F. and Niaki, K.S “Comparative Study on Space Qualified Paints Used for Thermal Control of a Small Satellite ”. Selected paper of The Fifth International Chemical Engineering Congress (IChEC2008), (Jan. 2008), Kish-Iran. Published in the Iranian Journal of Chemical Engineers (IJChE), 2009
2009 21. Ardekani, M. A. and Farhani, F Experimental Study on Response of Hot Wire and Cylindrical Hot Film Anemometers Operating under Varying Fluid Temperatures Flow Measurement and Instrumentation 20 (2009) 174-179.
2008 24. Emami, H., Farhani, F. and Safarabadi, M "Influence of modal effective mass distribution on the static and dynamic behavior of a satellite structure under base excitations J. Materials Science Research India, Volume 5(2), (2008).
2008 عنوان اثر سرعت دوراني واحد خرد-له كن و دماي واحد همزن بر كيفيت و كميت روغن زيتون استحصالي از رقم روغني ، مجله مهندسي بيوسيستم ايران (مجله علوم كشاورزي)، پرديس كشاورزي و منابع طبيعي دانشگاه تهران ، دوره 39 شماره 1، ص 83-75
2008 طراحي بهينه و توسعه دستگاه درو- ردیف ساز جلوتراکتوری و درو- بافه بند BCS نشریه علمي پژوهشی دانش کشاورزی- دانشكده كشاورزي دانشگاه تبريز، شماره 4 جلد 18، ص 223-233
2008 Л.А. Исаевич, М.И. Сидоренко, Д.М. Иваницкий, М.М. Малекиан Получение полос переменной толщины с регулируемым уширением Вестник БНТУ. – № 4. – С. 35–43
2008 Л.А. Исаевич, М.И. Сидоренко, Д.М. Иваницкий, М.М. Малекиан Определение значений критического угла и опережения при продольной прокатке полос переменной толщины Весцi Нац. акад. нав. Беларусi..–№ 4.– С.32–38.
2008 Л.А. Исаевич, М.И. Сидоренко, Д.М. Иваницкий, М.М. Малекиан Определение параметров процесса продольной прокатки для получения полос переменной толщины с нарастающим обжатием Вестник БНТУ. – № 3. – С. 18–26
2008 Л.А. Исаевич, М.И. Сидоренко, Д.М. Иваницкий, М.М. Малекиан Определение критического угла продольной прокатки полос переменной толщины с нарастающим обжатием Металлургия: Респ. межвед. сб. науч. тр. – 2008. – № 31. – С. 190–198
2008 HAMID EMAMI, FOAD FARHANI1 and MAJID SAFARABADI Influence of modal effective mass distribution on the static and dynamic behavior of a satellite structure under base excitations Material Science Research India Vol. 5(2), 209-218
2007 26. Niaki, K.S., Anvari, A. and Farhani, F Aluminum and Composite Materials for Satellite Structures- A Comparison of Thermal Performance”, J. Materials Science Research India, Volume 4(1), (2007).
2007 25. Niaki, K.S., Farhani, F. and Anvari, A Design and Construction of a Test Bed for Evaluation of Energy Efficiency of Residential Exhaust Fans J. Current World Environment, Volume 2(1), (2007).
2007 فراس حكاك و فواد فرحاني مقاومت گرمايي تماسي مجله علمی-ترویجی انجمن مهندسي مكانيك ايران، سال شانزدهم، شماره 55- آبان 1386.
2007 آذر انوري، مهران شهرياري، فواد فرحاني و كيوان سيدي نياكي مدلسازي‏، تحليل حرارتي و استخراج زواياي بهينه براي پانلهاي خورشيدي بازشونده در يك ماهواره مدار پايين زمين مدلسازي‏، تحليل حرارتي و استخراج زواياي بهينه براي پانلهاي خورشيدي بازشونده در يك ماهواره مدار پايين زمين
2007 Л.А. Исаевич, М.М. Малекиан Анализ и сравнение различных устройств и способов прокатки полос переменной по длине толщины Вестник БНТУ. – № 5. – С. 11–15.
2005 28. Hemmati, B., Farhani, F. and Boland, P Parametric Design of a Jig & Fixture Using CAE and Study of Positioners and Clamping with FEM” J. Materials Science Research India, Volume 3(2), (2005).
2005 27. Farhani, F., Hemmati, B. and Boland, P “Design and Modeling of a Modular Bore Gauge and Life Cycle Studies” J. Materials Science Research India, Volume 3(2), (2005).
2002 ساخت و ارزيابي ماشين خردكن سرشاخه هاي حاصل از هرس درختان ، مجله علمي پژوهش و سازندگي وزارت جهاد كشاورزي، شماره 55، 1381.
1997 30. Farhani, F., Sarangi, S.K. and Dutta, A A Hot Wall Vacuum Furnace For Brazing of Matrix Heat Exchangers ", Ind. Bulletin of Vacuum, (1997).
1993 31. Venkatarathnam, G., Farhani, F. and Sarangi, S.K Performance Evaluation of Stack of Perforated Plates Used in Matrix Heat Exchangers ”, Ind. J. Cryogenics, Vol. 18 (1-4), pp. 204-210, (1993).
 

©  تمامی حقوق متعلق به سازمان پژوهش‌های علمی و صنعتی ایران می باشد.